Your Health Has Our Full Attention

We’re honored to be among Fortune’s Most Admired Companies. What matters most to us: Improving your health.

Strategy and Strength|Jan.21, 2020

What’s more personal than your health?

What appears “everyday” from afar can be much more when it’s you and your loved ones. Life’s challenges can grow based on your proximity.

When it’s your child, there’s nothing small about those life-threatening issues often associated with premature babies with the smallest of hearts.

What Matters Most: Your Health

When it’s you or your loved one, there’s nothing insignificant about the debilitating discomfort that can replace hope with hesitancy, trepidation taking away so much of who they are, whether it be from chronic pain to the associated aches of regular fingersticking demanded by old-school glucose monitoring.

When it’s your body, there’s nothing microscopic about the potential for viruses to get the upper hand on society’s best science.

Any of those can take your full attention.

All of them have ours.

We’re putting big ideas to work for big solutions, many of which come in small, powerful packages that can be worn on or implanted in the body. It’s how we’re designing our life-changing technology to shape the future of health.

We’re putting our hearts in products designed to help the smallest of us at our most fragile times, from our Amplatzer Piccolo Occluder designed to close an opening in the hearts of preemie babies to the smallest mechanical heart valve available, a “sparkle” in her heart. That’s so Sadie.

We’re pushing our technology to do more to help, from treating more people with MitraClip’s with an expanded indication for severe secondary mitral regurgitation to enhancing heart attack detection among women via our High Sensitive Troponin-I test.

We’re seeking the same relief from pain that you want. We developed our Proclaim XR recharge-free stimulation system to deliver low-amplitude, intermittent bursts of electricity to change pain signals as they travel from the spinal cord to the brain.

We’re taking away the daily dread of painful, routine fingersticks for glucose monitoring. With the FreeStyle Libre 14 day system, real-time results, an 8-hour historical glucose trend and arrows showing where glucose levels are going — with high accuracy for up to two weeks — are standard with our wearable monitor. No wonder it was named one of the best medical technologies.

We’re working to find new mutations of the world’s deadliest bugs to help fight these new threats. It’s how we’re staying one-step ahead of HIV, as we’ve been since the beginning.

We’re keeping you nourished through all the stages of life. It’s why Similac was the first infant formula to include 2'-FL HMO, the result of pioneering research to bring it closer than ever to mother’s milk. It’s why PediaSure is powerful nutrition to help kids catch up on growth and why Pedialyte is designed to keep the whole family hydrated.

And it’s why we’re heartened to be named among Fortune’s Most Admired Companies again. We will never take it for granted.

It all adds up to making a difference in the lives of millions around the world every day, to being a place where science thrives, where we’re encouraging the next generation of scientists and innovators. A place where we’re working to save the planet’s resources and create lasting change where it’s needed most.

Our full attention has been captured by these things and more. All so you can keep yours on what matters most: The health of you and your family.

IMPORTANT SAFETY INFORMATION

SJM MASTERS SERIES MECHANICAL HEART VALVE MECHANICAL HEART VALVE SIZER

MITRACLIP CLIP DELIVERY SYSTEMS

SPINAL CORD STIMULATION

FREESTYLE LIBRE 14 DAY INDICATIONS AND IMPORTANT SAFETY INFORMATION

AMPLATZER PICCOLO OCCLUDER

INDICATIONS AND USAGE

The AMPLATZER PiccoloTM Occluder is a percutaneous, transcatheter occlusion device intended for the nonsurgical closure of a patent ductus arteriosus (PDA).

CONTRAINDICATIONS

  • Weight < 700 grams at time of the procedure
  • Age < 3 days at time of procedure
  • Coarctation of the aorta
  • Left pulmonary artery stenosis
  • Cardiac output that is dependent on right to left shunt through the PDA due to pulmonary hypertension
  • Intracardiac thrombus that may interfere with the implant procedure
  • Active infection requiring treatment at the time of implant
  • Patients with a PDA length smaller than 3 mm
  • Patients with a PDA diameter that is greater than 4 mm at the narrowest portion

WARNINGS

  • This device was sterilized with ethylene oxide and is for single use only. Do not reuse or re-sterilize this device. Attempts to resterilize this device can cause a malfunction, insufficient sterilization, or harm to the patient.
  • Do not use the device if the sterile package is open or damaged.
  • Use on or before the last day of the expiration month that is printed on the product packaging label.
  • Patients who are allergic to nickel can have an allergic reaction to this device.
  • Prepare for situations that require the removal of this device. Preparation includes access to a transcatheter snare kit and an on-site surgeon.
  • Accurate measurements of the ductus are crucial for correct occluder size selection.
  • Do not release the occluder from the delivery wire if either a retention disc protrudes into the pulmonary artery or aorta; or if the position of the occluder is not stable.
  • Remove embolized devices. Do not remove an embolized occluder through intracardiac structures unless the occluder is fully recaptured inside a catheter.

PRECAUTIONS

  • This device should be used only by physicians who are trained in standard transcatheter techniques. Determine which patients are candidates for procedures that use this device.
  • The physician should exercise clinical judgment in situations that involve the use of anticoagulants and antiplatelet drugs before, during, and/or after the use of this device.
  • Patients should have an activated clotting time (ACT) of greater than 200 sec prior to device placement, unless the patient has a significant risk for bleeding and is unable to be anti-coagulated.
  • The device may be delivered via an anterograde (venous) or a retrograde (arterial) approach. However, in small infants (≤2 kg), the device should be delivered using the anterograde (venous) approach since small infants are at an increased risk for arterial injury.
  • The AMPLATZER PiccoloTM Occluder contains nickel-titanium alloy, which is generally considered safe. However, in vitro testing has demonstrated that nickel is released from this device for a minimum of 60 days following implant. Patients who are allergic to nickel may have an allergic reaction to this device, especially those with a history of metal allergies. Certain allergic reactions can be serious; patients should seek immediate medical attention if there is suspicion of an allergic reaction. Symptoms may include difficulty in breathing or swelling of the face or throat. While data are currently limited, it is possible that some patients may develop an allergy to nickel if this device is implanted.
  • Use in specific populations
  • Pregnancy — Minimize radiation exposure to the fetus and the mother.
  • Nursing mothers — There has been no quantitative assessment for the presence of leachables in breast milk.
  • Store in a dry place.
  • Do not use contrast power injection with delivery catheter.

POTENTIAL ADVERSE EVENTS

Potential adverse events that may occur during or after a procedure placing this device include, but are not limited to:

  • Air embolus
  • Allergic dye reaction
  • Allergic drug reaction
  • Anesthesia reactions
  • Apnea
  • Arrhythmia
  • Bacterial endocarditis
  • Bleeding
  • Cardiac perforation
  • Cardiac tamponade
  • Chest pain
  • Device embolization
  • Device erosion
  • Death
  • Fever
  • Headache/migraine
  • Hemolysis
  • Hematoma
  • Hypertension
  • Hypotension
  • Infection
  • Myocardial infarction
  • Palpitations
  • Partial obstruction of aorta
  • Partial obstruction of pulmonary artery Pericardial effusion
  • Pericarditis
  • Peripheral embolism
  • Pleural effusion
  • Pulmonary embolism
  • Re-intervention for device removal
  • Respiratory distress
  • Stroke
  • Thrombus
  • Transient ischemic attack
  • Valvular regurgitation
  • Vascular access site injury
  • Vascular occlusion
  • Vessel perforation

SJM MASTERS SERIES MECHANICAL HEART VALVE MECHANICAL HEART VALVE SIZER

INDICATIONS FOR USE

The SJMTM Masters Series Mechanical Heart Valve is intended for use as a replacement valve in patients with a diseased, damaged, or malfunctioning mitral or aortic heart valve. This device

may also be used to replace a previously implanted mitral or aortic prosthetic heart valve.

The sizer model 905-15 is indicated to confirm size selection of the 15AHPJ-505 and 15MHPJ-505 valves.

CONTRAINDICATIONS

The SJMTM Masters Series Mechanical Heart Valve is contraindicated for individuals unable to tolerate anticoagulation therapy.

The sizer model 905-15 is contraindicated for use with any devices other than the 15 AHPJ-505 and 15MHPJ-505 valves. Any sizer sterilization method other than steam is contraindicated.

WARNINGS

  • For single use only. Attempts to reuse the valve may result in valve malfunction, inadequate sterilization, or patient harm.
  • Use only St. Jude MedicalTM mechanical heart valve sizers.
  • Do not use if:
    • The valve has been dropped, damaged, or mishandled in anyway.
    • The expiration date has elapsed.
    • The tamper-evident container seal or inner/ outer tray seals are damaged, broken, or missing.
  • Remove any residual tissue that may impair valve size selection, correct seating of the valve, rotation of the valve, or leaflet motion.
  • Proper valve size selection is crucial. Do not oversize the valve. If the native annulus measurement falls between two SJMTM Masters Series Mechanical Heart Valve sizes, use the smaller prosthetic valve size.
  • The outer tray is not sterile, and should not be placed in the sterile field.
  • To minimize direct handling of the valve during implantation, do not remove the holder/rotator until the valve has been seated in the annulus.
  • Do not use hard or rigid instruments to test leaflet mobility, as this may result in structural damage to the valve or thromboembolic complications. Use a St. Jude MedicalTM leaflet tester to gently test valve leaflet mobility.
  • Place sutures in the outer half of the valve sewing cuff.
  • Never apply force to the valve leaflets. Force may cause structural damage to the valve.
  • Use only SJMTM Valve Holder/Rotators to perform valve rotation. Use of other instruments could result in structural damage. The valve holder/rotator is intended for single use only and should be discarded after surgery.
  • The two retention sutures on the valve holder/ rotator must be cut and removed before the valve can be rotated.
  • Do not pass catheters or other instruments through St. Jude MedicalTM mechanical heart valves. This could result in scratched or damaged valve components, leaflet fracture, or dislodgment.
  • Cut suture ends short, especially in the vicinity of the pivot guards, to prevent leaflet impingement.

PRECAUTIONS

  • Do not touch the prosthetic valve unnecessarily, even with gloved hands. This may cause scratches or surface imperfections that may lead to thrombus formation.
  • Be careful not to cut or tear the valve sewing cuff when removing the identification tag and the holder/rotator from the valve.
  • Before placing sutures in the valve sewing cuff, verify that the valve is mounted correctly on the valve holder/rotator.
  • To avoid structural damage, the valve must be rotated in the fully open position.
  • To minimize rotational torque, verify that the valve holder/rotator is properly seated in the valve, and that the valve holder handle is perpendicular to the valve.
  • Remove any loose suture or thread, which may be a source of thrombus or thromboembolism.
  • Implantation of a prosthetic valve too large for the annulus may result in increased risk of damage to the conductive system, obstruction of the left ventricular outflow tract, impairment of valve mobility, damage to the left circumflex artery, and damage to surrounding tissues or cardiac structures including obstruction and/or distortion of adjacent cardiac structures.
  • NOTE: PROSPECTIVE DATA TO SUPPORT SAFETY AND EFFECTIVENESS OF THE 15-mm HP VALVE IMPLANTED IN THE AORTIC POSITION ARE NOT CURRENTLY AVAILABLE.

Sizer

  • Instruments must be cleaned and sterilized prior to use.
  • Do not use cracked, deformed, discolored/rusted, or damaged instruments.
  • Improper cleaning may result in an immunological or toxic reaction.
  • Instrument sterilization temperature must not exceed 280°F (138°C).
  • Do not bend flexible instrument handles beyond a 90° angle.
  • Instruments must be sterilized in a tray or container that is permeable to steam.
  • Do not expose instruments to cleaning or rinse agents that are not compatible with polysulfone or polyphenylsulfone.

POTENTIAL ADVERSE EVENTS

Complications associated with replacement mechanical heart valves include, but are not limited to, hemolysis, infections, thrombus, or thromboembolism, valve dehiscence, unacceptable hemodynamic performance, hemorrhagic complications secondary to anticoagulation therapy, heart block requiring pacemaker implant, prosthetic failure, adjacent cardiac structure interference, heart failure, stroke, myocardial infarction, or death. Any of these complications may require reoperation or explantation of the device.

MITRACLIP CLIP DELIVERY SYSTEMS

INDICATION FOR USE

The MitraClip™ NTR/XTR System is indicated for the percutaneous reduction of significant symptomatic mitral regurgitation (MR ≥ 3+) due to primary abnormality of the mitral apparatus [degenerative MR] in patients who have been determined to be at prohibitive risk for mitral valve surgery by a heart team, which includes a cardiac surgeon experienced in mitral valve surgery and a cardiologist experienced in mitral valve disease, and in whom existing comorbidities would not preclude the expected benefit from reduction of the mitral regurgitation.

The MitraClip™ NTR/XTR System, when used with maximally tolerated guideline-directed medical therapy (GDMT), is indicated for the treatment of symptomatic, moderate-to-severe or severe secondary (or functional) mitral regurgitation (MR; MR ≥ Grade III  per American Society of Echocardiography criteria) in patients with a left ventricular ejection fraction (LVEF) ≥ 20% and ≤ 50%, and a left ventricular end systolic dimension (LVESD) ≤ 70 mm whose symptoms and MR severity persist despite maximally tolerated GDMT as determined by a multidisciplinary heart team experienced in the evaluation and treatment of heart failure and mitral valve disease.

CONTRAINDICATIONS

The MitraClip™ NTR/XTR System is contraindicated in patients with the following conditions:

Patients who cannot tolerate procedural anticoagulation or post procedural anti-platelet regimen

Active endocarditis of the mitral valve

Rheumatic mitral valve disease

Evidence of intracardiac, inferior vena cava (IVC) or femoral venous thrombus

WARNINGS

DO NOT use MitraClip™ outside of the labeled indication.

The MitraClip™ Implant should be implanted with sterile techniques using fluoroscopy and echocardiography (e.g., transesophageal [TEE] and transthoracic [TTE]) in a facility with on-site cardiac surgery and immediate access to a cardiac operating room.

Read all instructions carefully.  Failure to follow these instructions, warnings and precautions may lead to device damage, user injury or patient injury. Use universal precautions for biohazards and sharps while handling the MitraClip™ System to avoid user injury.

Use of the MitraClip™ should be restricted to those physicians trained to perform invasive endovascular and transseptal procedures and those trained in the proper use of the system.

The Clip Delivery System is provided sterile and designed for single use only.  Cleaning, re-sterilization and / or reuse may result in infections, malfunction of the device or other serious injury or death.

Use caution when treating patients with hemodynamic instability requiring inotropic support or mechanical heart assistance due to the increased risk of mortality in this patient population. The safety and effectiveness of MitraClip™ in these patients has not been evaluated.

PRECAUTIONS

Note the product “Use by” date specified on the package.

Inspect all product prior to use. Do not use if the package is open or damaged, or if product is damaged.

Prohibitive Risk Primary (or degenerative) Mitral Regurgitation

Prohibitive risk is determined by the clinical judgment of a heart team, including a cardiac surgeon experienced in mitral valve surgery and a cardiologist experienced in mitral valve disease, due to the presence of one or more of the following documented surgical risk factors:

30-day STS predicted operative mortality risk score of

≥8% for patients deemed likely to undergo mitral valve replacement or

≥6% for patients deemed likely to undergo mitral valve repair

Porcelain aorta or extensively calcified ascending aorta.

Frailty (assessed by in-person cardiac surgeon consultation).

Hostile chest

Severe liver disease / cirrhosis (MELD Score > 12)

Severe pulmonary hypertension (systolic pulmonary artery pressure > 2/3 systemic pressure)

Unusual extenuating circumstance, such as right ventricular dysfunction with severe tricuspid regurgitation, chemotherapy for malignancy, major bleeding diathesis, immobility, AIDS, severe dementia, high risk of aspiration, internal mammary artery(IMA) at high risk of injury, etc.

Evaluable data regarding safety or effectiveness is not available for prohibitive risk DMR patients with an LVEF < 20% or an LVESD > 60 mm.  MitraClip® should be used only when criteria for clip suitability for DMR have been met.

The heart team should include a cardiac surgeon experienced in mitral valve surgery and a cardiologist experienced in mitral valve disease and may also include appropriate physicians to assess the adequacy of heart failure treatment and valvular anatomy.

Secondary Mitral Regurgitation

Evaluable data regarding safety or effectiveness is not available for secondary MR patients with an LVEF < 20% or an LVESD > 70 mm.

The multidisciplinary heart team should be experienced in the evaluation and treatment of heart failure and mitral valve disease and determine that symptoms and MR severity persist despite maximally tolerated GDMT.

POTENTIAL COMPLICATIONS AND ADVERSE EVENTS

The following ANTICIPATED EVENTS have been identified as possible complications of the

MitraClipTM procedure.

Death; Allergic reaction (anesthetic, contrast, Heparin, nickel alloy, latex); Aneurysm or pseudo-aneurysm; Arrhythmias; Atrial fibrillation; Atrial septal defect requiring intervention; Arterio-venous fistula; Bleeding;

Cardiac arrest; Cardiac perforation; Cardiac tamponade / Pericardial Effusion; Chordal entanglement / rupture; Coagulopathy; Conversion to standard valve surgery; Deep venous thrombus (DVT); Dislodgement of previously implanted devices; Dizziness; Drug reaction to anti-platelet / anticoagulation agents / contrast

media; Dyskinesia; Dyspnea; Edema; Emboli (air, thrombus, MitraClipTM Implant); Emergency cardiac surgery; Endocarditis; Esophageal irritation; Esophageal perforation or stricture; Failure to deliver MitraClipTM to the intended site; Failure to retrieve MitraClipTM System components; Fever or hyperthermia; Gastrointestinal bleeding or infarct; Hematoma; Hemolysis; Hemorrhage requiring transfusion; Hypotension / hypertension; Infection; Injury to mitral valve complicating or preventing later surgical repair; Lymphatic complications; Mesenteric ischemia; MitraClipTM Implant erosion, migration or malposition; MitraClipTM Implant thrombosis; MitraClipTM System component(s) embolization; Mitral stenosis; Mitral valve injury; Multi-system organ failure; Myocardial infarction; Nausea / vomiting; Pain; Peripheral ischemia; Prolonged angina; Prolonged ventilation; Pulmonary congestion; Pulmonary thrombo-embolism; Renal insufficiency or failure; Respiratory failure / atelectasis / pneumonia; Septicemia; Shock, Anaphylactic or Cardiogenic; Single leaflet device attachment (SLDA); Skin injury or tissue changes due to exposure to ionizing radiation; Stroke or transient ischemic attack (TIA); Urinary tract infection; Vascular trauma, dissection or occlusion; Vessel spasm; Vessel perforation or laceration; Worsening heart failure; Worsening mitral regurgitation; Wound dehiscence

SPINAL CORD STIMULATION

Read this section to gather important prescription and safety information.

INTENDED USE

This neurostimulation system is designed to deliver low-intensity electrical impulses to nerve structures. The system is intended to be used with leads and associated extensions that are compatible with the system.

INDICATIONS FOR USE

This neurostimulation system is indicated as an aid in the management of chronic, intractable pain of the trunk and/or limbs, including unilateral or bilateral pain associated with the following: failed back surgery syndrome and intractable low back and leg pain.

CONTRAINDICATIONS

This system is contraindicated for patients who are unable to operate the system or who have failed to receive effective pain relief during trial stimulation.

MRI SAFETY INFORMATION

Some models of this system are Magnetic Resonance (MR) Conditional, and patients with these devices may be scanned safely with magnetic resonance imaging (MRI) when the conditions for safe scanning are met. For more information about MR Conditional neurostimulation components and systems, including equipment settings, scanning procedures, and a complete listing of conditionally approved components, refer to the MRI procedures clinician's manual for neurostimulation systems (available online at manuals.sjm.com). For more information about MR Conditional products, visit the Abbott product information page at neuromodulation.abbott.

WARNINGS

The following warnings apply to this neurostimulation system.

Poor surgical risks. Neurostimulation should not be used on patients who are poor surgical risks or patients with multiple illnesses or active general infections.

Magnetic resonance imaging (MRI). Some patients may be implanted with the components that make up a Magnetic Resonance (MR) Conditional system, which allows them to receive an MRI scan if all the requirements for the implanted components and for scanning are met. A physician can help determine if a patient is eligible to receive an MRI scan by following the requirements provided by Abbott Medical. Physicians should also discuss any risks of MRI with patients.

Patients without an MR Conditional neurostimulation system should not be subjected to MRI because the electromagnetic field generated by an MRI may damage the device electronics and induce voltage through the lead that could jolt or shock the patient.

Diathermy therapy. Do not use short-wave diathermy, microwave diathermy, or therapeutic ultrasound diathermy (all now referred to as diathermy) on patients implanted with a neurostimulation system. Energy from diathermy can be transferred through the implanted system and cause tissue damage at the location of the implanted electrodes, resulting in severe injury or death.

Diathermy is further prohibited because it may also damage the neurostimulation system components. This damage could result in loss of therapy, requiring additional surgery for system implantation and replacement. Injury or damage can occur during diathermy treatment whether the neurostimulation system is turned on or off.

Electrosurgery. To avoid harming the patient or damaging the neurostimulation system, do not use monopolar electrosurgery devices on patients with implanted neurostimulation systems. Before using an electrosurgery device, place the device in Surgery Mode using the patient controller app or clinician programmer app. Confirm the neurostimulation system is functioning correctly after the procedure.

During implant procedures, if electrosurgery devices must be used, take the following actions:

Use bipolar electrosurgery only.

Complete any electrosurgery procedures before connecting the leads or extensions to the neurostimulator.

Keep the current paths from the electrosurgery device as far from the neurostimulation system as possible.

Set the electrosurgery device to the lowest possible energy setting.

Confirm that the neurostimulation system is functioning correctly during the implant procedure and before closing the neurostimulator pocket.

Implanted cardiac systems. Physicians need to be aware of the risk and possible interaction between a neurostimulation system and an implanted cardiac system, such as a pacemaker or defibrillator. Electrical pulses from a neurostimulation system may interact with the sensing operation of an implanted cardiac system, causing the cardiac system to respond inappropriately. To minimize or prevent the implanted cardiac system from sensing the output of the neurostimulation system, (1) maximize the distance between the implanted systems; (2) verify that the neurostimulation system is not interfering with the functions of the implanted cardiac system; and (3) avoid programming either device in a unipolar mode (using the device’s can as an anode) or using neurostimulation system settings that interfere with the function of the implantable cardiac system.

Pediatric use. Safety and effectiveness of neurostimulation for pediatric use have not been established.

Pregnancy and nursing. Safety and effectiveness of neurostimulation for use during pregnancy and nursing have not been established.

Device components. The use of components not approved for use by Abbott Medical with this system may result in damage to the system and increased risk to the patient.

Case damage. Do not handle the IPG if the case is pierced or ruptured because severe burns could result from exposure to battery chemicals.

IPG disposal. Return all explanted IPGs to Abbott Medical for safe disposal. IPGs contain batteries as well as other potentially hazardous materials. Do not crush, puncture, or burn the IPG because explosion or fire may result.

PRECAUTIONS

The following precautions apply to this neurostimulation system.

General Precautions

Clinician training. Implanting physicians should be experienced in the diagnosis and treatment of chronic pain syndromes and have undergone surgical and device implantation training.

Patient selection. It is extremely important to select patients appropriately for neurostimulation. Thorough psychiatric screening should be performed. Patients should not be dependent on drugs and should be able to operate the neurostimulation system.

Infection. Follow proper infection control procedures. Infections related to system implantation might require that the device be explanted.

Electromagnetic interference (EMI). Some equipment in home, work, medical, and public environments can generate EMI that is strong enough to interfere with the operation of a neurostimulation system or damage system components. Patients should avoid getting too close to these types of EMI sources, which include the following examples: commercial electrical equipment (such as arc welders and induction furnaces), communication equipment (such as microwave transmitters and high-power amateur transmitters), high-voltage power lines, radiofrequency identification (RFID) devices, and some medical procedures (such as therapeutic radiation and electromagnetic lithotripsy).

Security, antitheft, and radiofrequency identification (RFID) devices. Some antitheft devices, such as those used at entrances or exits of department stores, libraries, and other public places, and airport security screening devices may affect stimulation. Additionally, RFID devices, which are often used to read identification badges, as well as some tag deactivation devices, such as those used at payment counters at stores and loan desks at libraries, may also affect stimulation. Patients who are implanted with nonadjacent multiple leads and patients who are sensitive to low stimulation thresholds may experience a momentary increase in their perceived stimulation, which some patients have described as uncomfortable or jolting. Patients should cautiously approach such devices and should request help to bypass them. If they must go through a gate or doorway containing this type of device, patients should turn off their IPG and proceed with caution, being sure to move through the device quickly.

Wireless use restrictions. In some environments, the use of wireless functions (e.g., Bluetooth® wireless technology) may be restricted. Such restrictions may apply aboard airplanes, in hospitals, near explosives, or in hazardous locations. If you are unsure of the policy that applies to the use of this device, please ask for authorization to use it before turning it on. (Bluetooth® is a registered trademark of Bluetooth SIG, Inc.)

Mobile phones. While interference with mobile phones is not anticipated, technology continues to change and interaction between a neurostimulation system and a mobile phone is possible. Advise patients to contact their physician if they are concerned about their mobile phone interacting with their neurostimulation system.

Sterilization and Storage

Single-use, sterile device. The implanted components of this neurostimulation system are intended for a single use only. Sterile components in this kit have been sterilized using ethylene oxide (EtO) gas before shipment and are supplied in sterile packaging to permit direct introduction into the sterile field. Do not resterilize or reimplant an explanted system for any reason.

Storage environment. Store components and their packaging where they will not come in contact with liquids of any kind.

Handling and Implementation

Expiration date. An expiration date (or “use-before” date) is printed on the packaging. Do not use the system if the use-before date has expired.

Care and handling of components. Use extreme care when handling system components prior to implantation. Excessive heat, excessive traction, excessive bending, excessive twisting, or the use of sharp instruments may damage and cause failure of the components.

Package or component damage. Do not implant a device if the sterile package or components show signs of damage, if the sterile seal is ruptured, or if contamination is suspected for any reason. Return any suspect components to Abbott Medical for evaluation.

System testing. To ensure correct operation, always test the system during the implant procedure, before closing the neurostimulator pocket, and before the patient leaves the surgery suite.

Device modification. The equipment is not serviceable by the customer. To prevent injury or damage to the system, do not modify the equipment. If needed, return the equipment to Abbott Medical for service.

Hospital and Medical Environments

High-output ultrasonics and lithotripsy. The use of high-output devices, such as an electrohydraulic lithotriptor, may cause damage to the electronic circuitry of an implanted IPG. If lithotripsy must be used, do not focus the energy near the IPG.

Ultrasonic scanning equipment. The use of ultrasonic scanning equipment may cause mechanical damage to an implanted neurostimulation system if used directly over the implanted system.

External defibrillators. The safety of discharge of an external defibrillator on patients with implanted neurostimulation systems has not been established.

Therapeutic radiation. Therapeutic radiation may damage the electronic circuitry of an implanted neurostimulation system, although no testing has been done and no definite information on radiation effects is available. Sources of therapeutic radiation include therapeutic X rays, cobalt machines, and linear accelerators. If radiation therapy is required, the area over the implanted IPG should be shielded with lead. Damage to the system may not be immediately detectable.

ADVERSE EVENTS

In addition to those risks commonly associated with surgery, the following risks are associated with implanting or using this IPG:

Unpleasant sensations or motor disturbances, including involuntary movement, caused by stimulation at high outputs (If either occurs, turn off your IPG immediately.)

Stimulation in unwanted places (such as radicular stimulation of the chest wall)

Paralysis, weakness, clumsiness, numbness, or pain below the level of the implant

Persistent pain at the IPG site

Seroma (mass or swelling) at the IPG site

Allergic or rejection response to implant materials

Implant migration or skin erosion around the implant

Battery failure

FREESTYLE LIBRE 14 DAY INDICATIONS AND IMPORTANT SAFETY INFORMATION

The FreeStyle Libre 14 day Flash Glucose Monitoring System is a continuous glucose monitoring (CGM) device indicated for the management of diabetes in persons age 18 and older. It is designed to replace blood glucose testing for diabetes treatment decisions. The System detects trends and tracks patterns aiding in the detection of episodes of hyperglycemia and hypoglycemia, facilitating both acute and long-term therapy adjustments. Interpretation of the System readings should be based on the glucose trends and several sequential readings over time. The System is intended for single patient use and requires a prescription.

CONTRAINDICATIONS:

The FreeStyle Libre 14 day Flash Glucose Monitoring System must be removed prior to Magnetic Resonance Imaging (MRI), Computed Tomography (CT) scan, or high frequency electrical heat (diathermy) treatment. The effect of MRI, CT scans, or diathermy on the performance of the System has not been evaluated. The exposure may damage the Sensor and may impact proper function of the device which could cause incorrect readings.

WARNINGS:

Do not ignore symptoms that may be due to low or high blood glucose: If you are experiencing symptoms that are not consistent with your glucose readings, consult your health care professional.

Check Sensor glucose readings by conducting a fingerstick test with a blood glucose meter under the following conditions, when Sensor glucose readings may not be accurate and should not be used to make a diabetes treatment decision:

If you suspect that your reading may be inaccurate for any reason

When you are experiencing symptoms that may be due to low or high blood glucose

When you are experiencing symptoms that do not match the Sensor glucose readings

During the first 12 hours of wearing a FreeStyle Libre 14 day Sensor

During times of rapidly changing glucose (more than 2 mg/dL per minute)

When the Sensor glucose reading does not include a Current Glucose number or Glucose Trend Arrow

In order to confirm hypoglycemia or impending hypoglycemia as reported by the Sensor

When you see the Check Blood Glucose symbol, you must check your blood glucose with a blood glucose meter before making any treatment decisions. Sensor readings may not accurately reflect blood glucose levels.

Hypoglycemic unawareness: The System has not been evaluated for use in patients with hypoglycemic unawareness and will not automatically alert you of a hypoglycemic event without you scanning your Sensor.

No alarms without a Sensor scan: The System does not have alarms that will automatically notify you when you are having a severe low (hypoglycemic) or high (hyperglycemic) glucose event unless you scan your Sensor. For example, the System does not have an alarm that can alert or wake you when you are sleeping in the case of low or high glucose.

Choking hazard: The FreeStyle Libre System contains small parts that may be dangerous if swallowed.

CAUTIONS AND LIMITATIONS:

Below are important cautions and limitations to keep in mind so you can use the System safely. They are grouped into categories for easy reference.

What to know about Alarms/Alerts:

There are NO alarms or alerts unless you scan the Sensor.

What to know before using the System:

Review all product information before use.

Take standard precautions for transmission of blood borne pathogens to avoid contamination.

Who should not use the System:

Do not use the System in people less than 18 years of age. The System is not approved for use in people under 18 years of age and Sensor readings in this population may be inaccurate. In general, continuous